BH-6M80R

Parameter	Describe
Main chip	BH6M80
Panel Type	V-by-one 3840x2160
input Cable	Recommended length ≤ 0.6 meters
output Cable	High frequency FFC single shielding up to 1.8 meters
low latency	＜0.2mS
low power consumption	＜1.8W
Electrostatic protection	HBM:10,000 V

BH-LV2H

BH-LV2H is a V-By-One and LVDS signal test board. It supports 8-channel V-by-One UHD 4K (3840×2160) signal input, as well as LVDS HD signal input with 2-port LVDS FHD (1920×1080) signal input, and then converts these signals into HDMI output.

BH-4KVH-D

BH-4KVH-D is a 4K V-by-One to HDMI signal conversion board. It supports 8-lane V-by-One input, drives large-size 8-lane V-by-One 4K 60Hz display panels via V-by-One bridging, and synchronously outputs HDMI signals with a maximum resolution of 4K@60Hz. If the downstream display device does not support 4K 60Hz, it will output 1080P 60Hz signals instead.

BH-LV02-B

BH-LV02-B is a conversion board with LVDS signal extension and duplication functions. It can split one input signal into two outputs, enabling a single mainboard to drive two LVDS screens—making it widely applicable for ultra-thin dual-sided display requirements.

BH-7233-C

BH-7233-C is a 2K-to-4K signal conversion board (supporting 1920×1080@60Hz → 3840×2160@60Hz conversion). It features a standard Full-HD LVDS input interface (as defined by LG) and processes signals through image enhancement technologies such as Scaler-based upscaling. The board generates 4K ultra-high-definition V-By-One signals, which can directly drive 4K@60Hz display panels. For output, it supports 1-zone and 2-zone 4K V-By-One signal formats.

RELATED PRODUCTS

BH-LV2H

BH-4KVH-D

BH-87121-A

BH-LV02-B

BH-7233-C

BH-6M80R

Product Enquiry